b648 - high temperature retainer
Bondloc B648 is a low viscosity, high strength retaining compound, it cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening due to shock and vibration.
Designed for the bonding of cylindrical fitting parts where a high temperature resistance is required. Tolerates minor surface contaminations from various oils and protection fluids. Typical applications include fixing gears/sprockets onto gearbox shafts and rotors on electric motor shafts.
key features
- Colour: Green
- Viscosity: 400 – 600cps
- Gap Fill: 0.15mm
- Static Strength on Steel: >26N/mm2 (ISO 4587)
- Fixture Time: < 5 mins with activator
- Full Cure Time: 2 – 6 hours
- Min / Max Temp: -55°C – +180°C
pack sizes
- B648-10ml (6)
- B648C-10ml Clam (6)
- B648-25ml (6)
- B648C-25ml Clam (6)
- B648-50ml (6)
- B648C-50ml Clam (6)
- B648-250ml (1)
- Cures with the absence of air and contact with metal or copper ions
- Excess deposits will not cure and can be easily wiped away
- Clean surfaces prior to use with B7063 Cleaner for improved performance
- Not suitable for use on Plastics or Oxygen rich systems
- The bottle is only half full, as air space maintains product stability
- Apply localised heat to remove high strength grades
- Colour of the product helps denote the product strength - Red and Green are high strength
- To increase cure speed on passive and inert materials use B7649 Activator
Dr Stuk’s currently filming more product video’s with his crew.
Check back soon!
- Cures with the absence of air and contact with metal or copper ions
- Excess deposits will not cure and can be easily wiped away
- Clean surfaces prior to use with B7063 Cleaner for improved performance
- Not suitable for use on Plastics or Oxygen rich systems
- The bottle is only half full, as air space maintains product stability
- Apply localised heat to remove high strength grades
- Colour of the product helps denote the product strength - Red and Green are high strength
- To increase cure speed on passive and inert materials use B7649 Activator
Dr Stuk’s currently filming more product video’s with his crew.
Check back soon!
related products
b7063 - solvent cleaner
key features
- Function: For use prior to bonding and sealing applications
- Applications: Solvent based spray that cleans and degreases any surface before repairing or assembly with Bondloc adhesives
b7649 - anaerobic activator
key features
- Function: Used to increase cure speeds
- Applications: Increases cure speeds of anaerobic liquids and pastes, works well on inert materials like stainless steel and aluminium
b7782 - gasket remover
key features
- Function: Used to remove anaerobic gaskets and paint
- Applications: Gasket remover lifts formed-in-place gaskets, carbon deposits, dried oil, grease and paint from any type of metal
product range
Previous
Next
contact us direct
Bondloc adhesives and engineering products are available to buy at a wide range of online or in store stockists.
To find your nearest Bondloc stockist get in touch with us today
To find your nearest Bondloc stockist get in touch with us today